HashCodeBuilder (facelog-db-base 2.4.2 API)

java.lang.Object
- net.gdface.facelog.db.HashCodeBuilder

```
public class HashCodeBuilder
extends java.lang.Object
```
Assists in implementing Object.hashCode() methods.

This class enables a good hashCode method to be built for any class. It follows the rules laid out in the book Effective Java by Joshua Bloch. Writing a good hashCode method is actually quite difficult. This class aims to simplify the process.

All relevant fields from the object should be included in the hashCode method. Derived fields may be excluded. In general, any field used in the equals method must be used in the hashCode method.

To use this class write code as follows:
```
 public class Person {
   String name;
   int age;
   boolean isSmoker;
   ...

   public int hashCode() {
     // you pick a hard-coded, randomly chosen, non-zero, odd number
     // ideally different for each class
     return new HashCodeBuilder(17, 37).
       append(name).
       append(age).
       append(smoker).
       toHashCode();
   }
 }
 
```
If required, the superclass hashCode() can be added using appendSuper(int).

Alternatively, there is a method that uses reflection to determine the fields to test. Because these fields are usually private, the method, reflectionHashCode, uses AccessibleObject.setAccessible to change the visibility of the fields. This will fail under a security manager, unless the appropriate permissions are set up correctly. It is also slower than testing explicitly.

A typical invocation for this method would look like:
```
 public int hashCode() {
   return HashCodeBuilder.reflectionHashCode(this);
 }
 
```
从以下版本开始:

1.0

版本:

$Id: HashCodeBuilder.java 161243 2005-04-14 04:30:28Z ggregory $

作者:

Stephen Colebourne, Gary Gregory, Pete Gieser

构造器概要

构造器
构造器和说明
`HashCodeBuilder()` Uses two hard coded choices for the constants needed to build a `hashCode`.
`HashCodeBuilder(int initialNonZeroOddNumber, int multiplierNonZeroOddNumber)` Two randomly chosen, non-zero, odd numbers must be passed in.

方法概要

方法
限定符和类型	方法和说明
`HashCodeBuilder`	`append(boolean value)` Append a `hashCode` for a `boolean`.
`HashCodeBuilder`	`append(boolean[] array)` Append a `hashCode` for a `boolean` array.
`HashCodeBuilder`	`append(byte value)` Append a `hashCode` for a `byte`.
`HashCodeBuilder`	`append(byte[] array)` Append a `hashCode` for a `byte` array.
`HashCodeBuilder`	`append(char value)` Append a `hashCode` for a `char`.
`HashCodeBuilder`	`append(char[] array)` Append a `hashCode` for a `char` array.
`HashCodeBuilder`	`append(double value)` Append a `hashCode` for a `double`.
`HashCodeBuilder`	`append(double[] array)` Append a `hashCode` for a `double` array.
`HashCodeBuilder`	`append(float value)` Append a `hashCode` for a `float`.
`HashCodeBuilder`	`append(float[] array)` Append a `hashCode` for a `float` array.
`HashCodeBuilder`	`append(int value)` Append a `hashCode` for an `int`.
`HashCodeBuilder`	`append(int[] array)` Append a `hashCode` for an `int` array.
`HashCodeBuilder`	`append(long value)` Append a `hashCode` for a `long`.
`HashCodeBuilder`	`append(long[] array)` Append a `hashCode` for a `long` array.
`HashCodeBuilder`	`append(java.lang.Object object)` Append a `hashCode` for an `Object`.
`HashCodeBuilder`	`append(java.lang.Object[] array)` Append a `hashCode` for an `Object` array.
`HashCodeBuilder`	`append(short value)` Append a `hashCode` for a `short`.
`HashCodeBuilder`	`append(short[] array)` Append a `hashCode` for a `short` array.
`HashCodeBuilder`	`appendSuper(int superHashCode)` Adds the result of super.hashCode() to this builder.
`static int`	`reflectionHashCode(int initialNonZeroOddNumber, int multiplierNonZeroOddNumber, java.lang.Object object)` This method uses reflection to build a valid hash code.
`static int`	`reflectionHashCode(int initialNonZeroOddNumber, int multiplierNonZeroOddNumber, java.lang.Object object, boolean testTransients)` This method uses reflection to build a valid hash code.
`static int`	`reflectionHashCode(int initialNonZeroOddNumber, int multiplierNonZeroOddNumber, java.lang.Object object, boolean testTransients, java.lang.Class reflectUpToClass)` This method uses reflection to build a valid hash code.
`static int`	`reflectionHashCode(java.lang.Object object)` This method uses reflection to build a valid hash code.
`static int`	`reflectionHashCode(java.lang.Object object, boolean testTransients)` This method uses reflection to build a valid hash code.
`int`	`toHashCode()` Return the computed `hashCode`.

从类继承的方法 java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- 构造器详细资料
  - HashCodeBuilder
```
public HashCodeBuilder()
```
    Uses two hard coded choices for the constants needed to build a hashCode.
  - HashCodeBuilder
```
public HashCodeBuilder(int initialNonZeroOddNumber,
               int multiplierNonZeroOddNumber)
```
    Two randomly chosen, non-zero, odd numbers must be passed in. Ideally these should be different for each class, however this is not vital.
    
    Prime numbers are preferred, especially for the multiplier.
    
    参数:
    initialNonZeroOddNumber - a non-zero, odd number used as the initial value
    multiplierNonZeroOddNumber - a non-zero, odd number used as the multiplier
    
    抛出:
    
    java.lang.IllegalArgumentException - if the number is zero or even
- 方法详细资料
  - reflectionHashCode
```
public static int reflectionHashCode(java.lang.Object object)
```
    This method uses reflection to build a valid hash code.
    
    This constructor uses two hard coded choices for the constants needed to build a hash code.
    
    It uses AccessibleObject.setAccessible to gain access to private fields. This means that it will throw a security exception if run under a security manager, if the permissions are not set up correctly. It is also not as efficient as testing explicitly.
    
    Transient members will be not be used, as they are likely derived fields, and not part of the value of the Object.
    
    Static fields will not be tested. Superclass fields will be included.
    
    参数:
    object - the Object to create a hashCode for
    
    返回:
    int hash code
    
    抛出:
    
    java.lang.IllegalArgumentException - if the object is null
  - reflectionHashCode
```
public static int reflectionHashCode(java.lang.Object object,
                     boolean testTransients)
```
    This method uses reflection to build a valid hash code.
    
    This constructor uses two hard coded choices for the constants needed to build a hash code.
    
    It uses AccessibleObject.setAccessible to gain access to private fields. This means that it will throw a security exception if run under a security manager, if the permissions are not set up correctly. It is also not as efficient as testing explicitly.
    
    If the TestTransients parameter is set to true, transient members will be tested, otherwise they are ignored, as they are likely derived fields, and not part of the value of the Object.
    
    Static fields will not be tested. Superclass fields will be included.
    
    参数:
    object - the Object to create a hashCode for
    testTransients - whether to include transient fields
    
    返回:
    int hash code
    
    抛出:
    
    java.lang.IllegalArgumentException - if the object is null
  - reflectionHashCode
```
public static int reflectionHashCode(int initialNonZeroOddNumber,
                     int multiplierNonZeroOddNumber,
                     java.lang.Object object)
```
    This method uses reflection to build a valid hash code.
    
    It uses AccessibleObject.setAccessible to gain access to private fields. This means that it will throw a security exception if run under a security manager, if the permissions are not set up correctly. It is also not as efficient as testing explicitly.
    
    Transient members will be not be used, as they are likely derived fields, and not part of the value of the Object.
    
    Static fields will not be tested. Superclass fields will be included.
    
    Two randomly chosen, non-zero, odd numbers must be passed in. Ideally these should be different for each class, however this is not vital. Prime numbers are preferred, especially for the multiplier.
    
    参数:
    initialNonZeroOddNumber - a non-zero, odd number used as the initial value
    multiplierNonZeroOddNumber - a non-zero, odd number used as the multiplier
    object - the Object to create a hashCode for
    
    返回:
    int hash code
    
    抛出:
    
    java.lang.IllegalArgumentException - if the Object is null
    
    java.lang.IllegalArgumentException - if the number is zero or even
  - reflectionHashCode
```
public static int reflectionHashCode(int initialNonZeroOddNumber,
                     int multiplierNonZeroOddNumber,
                     java.lang.Object object,
                     boolean testTransients)
```
    This method uses reflection to build a valid hash code.
    
    It uses AccessibleObject.setAccessible to gain access to private fields. This means that it will throw a security exception if run under a security manager, if the permissions are not set up correctly. It is also not as efficient as testing explicitly.
    
    If the TestTransients parameter is set to true, transient members will be tested, otherwise they are ignored, as they are likely derived fields, and not part of the value of the Object.
    
    Static fields will not be tested. Superclass fields will be included.
    
    Two randomly chosen, non-zero, odd numbers must be passed in. Ideally these should be different for each class, however this is not vital. Prime numbers are preferred, especially for the multiplier.
    
    参数:
    initialNonZeroOddNumber - a non-zero, odd number used as the initial value
    multiplierNonZeroOddNumber - a non-zero, odd number used as the multiplier
    object - the Object to create a hashCode for
    testTransients - whether to include transient fields
    
    返回:
    int hash code
    
    抛出:
    
    java.lang.IllegalArgumentException - if the Object is null
    
    java.lang.IllegalArgumentException - if the number is zero or even
  - reflectionHashCode
```
public static int reflectionHashCode(int initialNonZeroOddNumber,
                     int multiplierNonZeroOddNumber,
                     java.lang.Object object,
                     boolean testTransients,
                     java.lang.Class reflectUpToClass)
```
    This method uses reflection to build a valid hash code.
    
    It uses AccessibleObject.setAccessible to gain access to private fields. This means that it will throw a security exception if run under a security manager, if the permissions are not set up correctly. It is also not as efficient as testing explicitly.
    
    If the TestTransients parameter is set to true, transient members will be tested, otherwise they are ignored, as they are likely derived fields, and not part of the value of the Object.
    
    Static fields will not be included. Superclass fields will be included up to and including the specified superclass. A null superclass is treated as java.lang.Object.
    
    Two randomly chosen, non-zero, odd numbers must be passed in. Ideally these should be different for each class, however this is not vital. Prime numbers are preferred, especially for the multiplier.
    
    参数:
    initialNonZeroOddNumber - a non-zero, odd number used as the initial value
    multiplierNonZeroOddNumber - a non-zero, odd number used as the multiplier
    object - the Object to create a hashCode for
    testTransients - whether to include transient fields
    reflectUpToClass - the superclass to reflect up to (inclusive), may be null
    
    返回:
    int hash code
    
    抛出:
    
    java.lang.IllegalArgumentException - if the Object is null
    
    java.lang.IllegalArgumentException - if the number is zero or even
    从以下版本开始:
    
    2.0
  - appendSuper
```
public HashCodeBuilder appendSuper(int superHashCode)
```
    Adds the result of super.hashCode() to this builder.
    
    参数:
    superHashCode - the result of calling super.hashCode()
    
    返回:
    this HashCodeBuilder, used to chain calls.
    从以下版本开始:
    
    2.0
  - append
```
public HashCodeBuilder append(java.lang.Object object)
```
    Append a hashCode for an Object.
    
    参数:
    object - the Object to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(long value)
```
    Append a hashCode for a long.
    
    参数:
    value - the long to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(int value)
```
    Append a hashCode for an int.
    
    参数:
    value - the int to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(short value)
```
    Append a hashCode for a short.
    
    参数:
    value - the short to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(char value)
```
    Append a hashCode for a char.
    
    参数:
    value - the char to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(byte value)
```
    Append a hashCode for a byte.
    
    参数:
    value - the byte to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(double value)
```
    Append a hashCode for a double.
    
    参数:
    value - the double to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(float value)
```
    Append a hashCode for a float.
    
    参数:
    value - the float to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(boolean value)
```
    Append a hashCode for a boolean.
    
    This adds iConstant * 1 to the hashCode and not a 1231 or 1237 as done in java.lang.Boolean. This is in accordance with the Effective Java design.
    
    参数:
    value - the boolean to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(java.lang.Object[] array)
```
    Append a hashCode for an Object array.
    
    参数:
    array - the array to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(long[] array)
```
    Append a hashCode for a long array.
    
    参数:
    array - the array to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(int[] array)
```
    Append a hashCode for an int array.
    
    参数:
    array - the array to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(short[] array)
```
    Append a hashCode for a short array.
    
    参数:
    array - the array to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(char[] array)
```
    Append a hashCode for a char array.
    
    参数:
    array - the array to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(byte[] array)
```
    Append a hashCode for a byte array.
    
    参数:
    array - the array to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(double[] array)
```
    Append a hashCode for a double array.
    
    参数:
    array - the array to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(float[] array)
```
    Append a hashCode for a float array.
    
    参数:
    array - the array to add to the hashCode
    
    返回:
    this
  - append
```
public HashCodeBuilder append(boolean[] array)
```
    Append a hashCode for a boolean array.
    
    参数:
    array - the array to add to the hashCode
    
    返回:
    this
  - toHashCode
```
public int toHashCode()
```
    Return the computed hashCode.
    
    返回:
    hashCode based on the fields appended

类 HashCodeBuilder

构造器概要

方法概要

从类继承的方法 java.lang.Object

构造器详细资料

HashCodeBuilder

HashCodeBuilder

方法详细资料

reflectionHashCode

reflectionHashCode

reflectionHashCode

reflectionHashCode

reflectionHashCode

appendSuper

append

append

append

append

append

append

append

append

append

append

append

append

append

append

append

append

append

append

toHashCode