final case class PV_RectComb2(chainA: GE, chainB: GE, numTeeth: GE = 1.0f, phase: GE = 0.0f, width: GE = 0.5f) extends SingleOut with ControlRated with HasSideEffect with IsIndividual with Product with Serializable
A phase vocoder UGen that switches between two input spectra according to a
rectangle wave. This is basically identical to PV_RectComb , however during
the low slopes of the rectangle wave, instead of clearing out the bins, it
copies over the corresponding bins of the second fft input buffer.
- chainA
the first FFT'ed buffer (this gets replaced by the output signal)
- chainB
the second FFT'ed buffer
- numTeeth
the number of periods in the rectangle wave, where zero would mean the first input signal is fully passed through, one means that there is exactly one period of the wave across the spectrum, hence one pass-band (first signal passed through) and one stop-band (second signal passed through).
- phase
the phase offset of the rectangle wave, where 1.0 is one full period. This is like the offset into the wavetable holding the rectangle, so a value of 0.25 means we start 25% into the basic waveform, and after 0.75 periods the next full period (high slope) begins.
- width
the pulse width between 0.0 (infinitely small high slope, so all bins are copied from the second input) to 0.5 (half period is high slope -- copied from first input --, half period is low slope -- copied from second input) to 1.0 (maximally wide high slope, so all bins passed from the first input).
- See also
- Alphabetic
- By Inheritance
- PV_RectComb2
- Serializable
- Serializable
- IsIndividual
- HasSideEffect
- ControlRated
- SingleOut
- SomeOut
- Lazy
- GE
- UGenSource
- Expander
- Lazy
- Product
- Equals
- AnyRef
- Any
- Hide All
- Show All
- Public
- All
Instance Constructors
-
new
PV_RectComb2(chainA: GE, chainB: GE, numTeeth: GE = 1.0f, phase: GE = 0.0f, width: GE = 0.5f)
- chainA
the first FFT'ed buffer (this gets replaced by the output signal)
- chainB
the second FFT'ed buffer
- numTeeth
the number of periods in the rectangle wave, where zero would mean the first input signal is fully passed through, one means that there is exactly one period of the wave across the spectrum, hence one pass-band (first signal passed through) and one stop-band (second signal passed through).
- phase
the phase offset of the rectangle wave, where 1.0 is one full period. This is like the offset into the wavetable holding the rectangle, so a value of 0.25 means we start 25% into the basic waveform, and after 0.75 periods the next full period (high slope) begins.
- width
the pulse width between 0.0 (infinitely small high slope, so all bins are copied from the second input) to 0.5 (half period is high slope -- copied from first input --, half period is low slope -- copied from second input) to 1.0 (maximally wide high slope, so all bins passed from the first input).
Value Members
-
final
def
!=(arg0: Any): Boolean
- Definition Classes
- AnyRef → Any
-
final
def
##(): Int
- Definition Classes
- AnyRef → Any
-
final
def
==(arg0: Any): Boolean
- Definition Classes
- AnyRef → Any
-
final
def
asInstanceOf[T0]: T0
- Definition Classes
- Any
- val chainA: GE
- val chainB: GE
-
def
clone(): AnyRef
- Attributes
- protected[java.lang]
- Definition Classes
- AnyRef
- Annotations
- @native() @throws( ... )
-
final
def
eq(arg0: AnyRef): Boolean
- Definition Classes
- AnyRef
-
def
finalize(): Unit
- Attributes
- protected[java.lang]
- Definition Classes
- AnyRef
- Annotations
- @throws( classOf[java.lang.Throwable] )
-
final
def
getClass(): Class[_]
- Definition Classes
- AnyRef → Any
- Annotations
- @native()
-
lazy val
hashCode: Int
- Definition Classes
- UGenSource → AnyRef → Any
-
final
def
isInstanceOf[T0]: Boolean
- Definition Classes
- Any
-
def
makeUGen(_args: Vec[UGenIn]): UGenInLike
- Attributes
- protected
- Definition Classes
- PV_RectComb2 → UGenSource
-
def
makeUGens: UGenInLike
Abstract method which must be implemented by creating the actual
UGens during expansion.Abstract method which must be implemented by creating the actual
UGens during expansion. This method is at most called once during graph expansion- returns
the expanded object (depending on the type parameter
U)
- Attributes
- protected
- Definition Classes
- PV_RectComb2 → Expander
-
final
def
name: String
- Definition Classes
- UGenSource
-
final
def
ne(arg0: AnyRef): Boolean
- Definition Classes
- AnyRef
-
final
def
notify(): Unit
- Definition Classes
- AnyRef
- Annotations
- @native()
-
final
def
notifyAll(): Unit
- Definition Classes
- AnyRef
- Annotations
- @native()
- val numTeeth: GE
- val phase: GE
-
final
def
rate: Rate
- Definition Classes
- ControlRated
-
final
def
synchronized[T0](arg0: ⇒ T0): T0
- Definition Classes
- AnyRef
-
final
def
wait(): Unit
- Definition Classes
- AnyRef
- Annotations
- @throws( ... )
-
final
def
wait(arg0: Long, arg1: Int): Unit
- Definition Classes
- AnyRef
- Annotations
- @throws( ... )
-
final
def
wait(arg0: Long): Unit
- Definition Classes
- AnyRef
- Annotations
- @native() @throws( ... )
- val width: GE