BufferedTokenStream (jadex-android-antlr 3.0.0 API)

java.lang.Object
- org.antlr.runtime.BufferedTokenStream

All Implemented Interfaces:

IntStream, TokenStream

Direct Known Subclasses:

CommonTokenStream
```
public class BufferedTokenStream
extends java.lang.Object
implements TokenStream
```
Buffer all input tokens but do on-demand fetching of new tokens from lexer. Useful when the parser or lexer has to set context/mode info before proper lexing of future tokens. The ST template parser needs this, for example, because it has to constantly flip back and forth between inside/output templates. E.g., }> has to parse names as part of an expression but "hi, " as a nested template. You can't use this stream if you pass whitespace or other off-channel tokens to the parser. The stream can't ignore off-channel tokens. (UnbufferedTokenStream is the same way.) This is not a subclass of UnbufferedTokenStream because I don't want to confuse small moving window of tokens it uses for the full buffer.

Field Summary

Fields
Modifier and Type	Field and Description
`protected int`	`lastMarker` Track the last mark() call result value for use in rewind().
`protected int`	`p` The index into the tokens list of the current token (next token to consume).
`protected int`	`range`
`protected java.util.List<Token>`	`tokens` Record every single token pulled from the source so we can reproduce chunks of it later.
`protected TokenSource`	`tokenSource`

Constructor Summary

Constructors
Constructor and Description

BufferedTokenStream()

BufferedTokenStream(TokenSource tokenSource)

Constructors
Constructor and Description
`BufferedTokenStream()`
`BufferedTokenStream(TokenSource tokenSource)`

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`void`	`consume()` Move the input pointer to the next incoming token.
`protected void`	`fetch(int n)` add n elements to buffer
`void`	`fill()` Get all tokens from lexer until EOF
`Token`	`get(int i)` Get a token at an absolute index i; 0..n-1.
`java.util.List`	`get(int start, int stop)` Get all tokens from start..stop inclusively
`java.lang.String`	`getSourceName()` Where are you getting symbols from? Normally, implementations will pass the buck all the way to the lexer who can ask its input stream for the file name or whatever.
`java.util.List`	`getTokens()`
`java.util.List`	`getTokens(int start, int stop)`
`java.util.List`	`getTokens(int start, int stop, BitSet types)` Given a start and stop index, return a List of all tokens in the token type BitSet.
`java.util.List`	`getTokens(int start, int stop, int ttype)`
`java.util.List`	`getTokens(int start, int stop, java.util.List types)`
`TokenSource`	`getTokenSource()` Where is this stream pulling tokens from? This is not the name, but the object that provides Token objects.
`int`	`index()` Return the current input symbol index 0..n where n indicates the last symbol has been read.
`int`	`LA(int i)` Get int at current input pointer + i ahead where i=1 is next int.
`protected Token`	`LB(int k)`
`Token`	`LT(int k)` Get Token at current input pointer + i ahead where i=1 is next Token.
`int`	`mark()` Tell the stream to start buffering if it hasn't already.
`int`	`range()` How far ahead has the stream been asked to look? The return value is a valid index from 0..n-1.
`void`	`release(int marker)` You may want to commit to a backtrack but don't want to force the stream to keep bookkeeping objects around for a marker that is no longer necessary.
`void`	`reset()`
`void`	`rewind()` Rewind to the input position of the last marker.
`void`	`rewind(int marker)` Reset the stream so that next call to index would return marker.
`void`	`seek(int index)` Set the input cursor to the position indicated by index.
`void`	`setTokenSource(TokenSource tokenSource)` Reset this token stream by setting its token source.
`protected void`	`setup()`
`int`	`size()` Only makes sense for streams that buffer everything up probably, but might be useful to display the entire stream or for testing.
`protected void`	`sync(int i)` Make sure index i in tokens has a token.
`java.lang.String`	`toString()` Grab all tokens from stream and return string
`java.lang.String`	`toString(int start, int stop)` Return the text of all tokens from start to stop, inclusive.
`java.lang.String`	`toString(Token start, Token stop)` Because the user is not required to use a token with an index stored in it, we must provide a means for two token objects themselves to indicate the start/end location.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

- Field Detail
  - tokenSource
```
protected TokenSource tokenSource
```
  - tokens
```
protected java.util.List<Token> tokens
```
    Record every single token pulled from the source so we can reproduce chunks of it later. The buffer in LookaheadStream overlaps sometimes as its moving window moves through the input. This list captures everything so we can access complete input text.
  - lastMarker
```
protected int lastMarker
```
    Track the last mark() call result value for use in rewind().
  - p
```
protected int p
```
    The index into the tokens list of the current token (next token to consume). tokens[p] should be LT(1). p=-1 indicates need to initialize with first token. The ctor doesn't get a token. First call to LT(1) or whatever gets the first token and sets p=0;
  - range
```
protected int range
```
- Constructor Detail
  - BufferedTokenStream
```
public BufferedTokenStream()
```
  - BufferedTokenStream
```
public BufferedTokenStream(TokenSource tokenSource)
```
- Method Detail
  - getTokenSource
```
public TokenSource getTokenSource()
```
    Description copied from interface: TokenStream
    
    Where is this stream pulling tokens from? This is not the name, but the object that provides Token objects.
    
    Specified by:
    
    getTokenSource in interface TokenStream
  - index
```
public int index()
```
    Description copied from interface: IntStream
    
    Return the current input symbol index 0..n where n indicates the last symbol has been read. The index is the symbol about to be read not the most recently read symbol.
    
    Specified by:
    
    index in interface IntStream
  - range
```
public int range()
```
    Description copied from interface: TokenStream
    
    How far ahead has the stream been asked to look? The return value is a valid index from 0..n-1.
    
    Specified by:
    
    range in interface TokenStream
  - mark
```
public int mark()
```
    Description copied from interface: IntStream
    
    Tell the stream to start buffering if it hasn't already. Return current input position, index(), or some other marker so that when passed to rewind() you get back to the same spot. rewind(mark()) should not affect the input cursor. The Lexer track line/col info as well as input index so its markers are not pure input indexes. Same for tree node streams.
    
    Specified by:
    
    mark in interface IntStream
  - release
```
public void release(int marker)
```
    Description copied from interface: IntStream
    
    You may want to commit to a backtrack but don't want to force the stream to keep bookkeeping objects around for a marker that is no longer necessary. This will have the same behavior as rewind() except it releases resources without the backward seek. This must throw away resources for all markers back to the marker argument. So if you're nested 5 levels of mark(), and then release(2) you have to release resources for depths 2..5.
    
    Specified by:
    
    release in interface IntStream
  - rewind
```
public void rewind(int marker)
```
    Description copied from interface: IntStream
    
    Reset the stream so that next call to index would return marker. The marker will usually be index() but it doesn't have to be. It's just a marker to indicate what state the stream was in. This is essentially calling release() and seek(). If there are markers created after this marker argument, this routine must unroll them like a stack. Assume the state the stream was in when this marker was created.
    
    Specified by:
    
    rewind in interface IntStream
  - rewind
```
public void rewind()
```
    Description copied from interface: IntStream
    
    Rewind to the input position of the last marker. Used currently only after a cyclic DFA and just before starting a sem/syn predicate to get the input position back to the start of the decision. Do not "pop" the marker off the state. mark(i) and rewind(i) should balance still. It is like invoking rewind(last marker) but it should not "pop" the marker off. It's like seek(last marker's input position).
    
    Specified by:
    
    rewind in interface IntStream
  - reset
```
public void reset()
```
  - seek
```
public void seek(int index)
```
    Description copied from interface: IntStream
    
    Set the input cursor to the position indicated by index. This is normally used to seek ahead in the input stream. No buffering is required to do this unless you know your stream will use seek to move backwards such as when backtracking. This is different from rewind in its multi-directional requirement and in that its argument is strictly an input cursor (index). For char streams, seeking forward must update the stream state such as line number. For seeking backwards, you will be presumably backtracking using the mark/rewind mechanism that restores state and so this method does not need to update state when seeking backwards. Currently, this method is only used for efficient backtracking using memoization, but in the future it may be used for incremental parsing. The index is 0..n-1. A seek to position i means that LA(1) will return the ith symbol. So, seeking to 0 means LA(1) will return the first element in the stream.
    
    Specified by:
    
    seek in interface IntStream
  - size
```
public int size()
```
    Description copied from interface: IntStream
    
    Only makes sense for streams that buffer everything up probably, but might be useful to display the entire stream or for testing. This value includes a single EOF.
    
    Specified by:
    
    size in interface IntStream
  - consume
```
public void consume()
```
    Move the input pointer to the next incoming token. The stream must become active with LT(1) available. consume() simply moves the input pointer so that LT(1) points at the next input symbol. Consume at least one token. Walk past any token not on the channel the parser is listening to.
    
    Specified by:
    
    consume in interface IntStream
  - sync
```
protected void sync(int i)
```
    Make sure index i in tokens has a token.
  - fetch
```
protected void fetch(int n)
```
    add n elements to buffer
  - get
```
public Token get(int i)
```
    Description copied from interface: TokenStream
    
    Get a token at an absolute index i; 0..n-1. This is really only needed for profiling and debugging and token stream rewriting. If you don't want to buffer up tokens, then this method makes no sense for you. Naturally you can't use the rewrite stream feature. I believe DebugTokenStream can easily be altered to not use this method, removing the dependency.
    
    Specified by:
    
    get in interface TokenStream
  - get
```
public java.util.List get(int start,
                          int stop)
```
    Get all tokens from start..stop inclusively
  - LA
```
public int LA(int i)
```
    Description copied from interface: IntStream
    
    Get int at current input pointer + i ahead where i=1 is next int. Negative indexes are allowed. LA(-1) is previous token (token just matched). LA(-i) where i is before first token should yield -1, invalid char / EOF.
    
    Specified by:
    
    LA in interface IntStream
  - LB
```
protected Token LB(int k)
```
  - LT
```
public Token LT(int k)
```
    Description copied from interface: TokenStream
    
    Get Token at current input pointer + i ahead where i=1 is next Token. i<0 indicates tokens in the past. So -1 is previous token and -2 is two tokens ago. LT(0) is undefined. For i>=n, return Token.EOFToken. Return null for LT(0) and any index that results in an absolute address that is negative.
    
    Specified by:
    
    LT in interface TokenStream
  - setup
```
protected void setup()
```
  - setTokenSource
```
public void setTokenSource(TokenSource tokenSource)
```
    Reset this token stream by setting its token source.
  - getTokens
```
public java.util.List getTokens()
```
  - getTokens
```
public java.util.List getTokens(int start,
                                int stop)
```
  - getTokens
```
public java.util.List getTokens(int start,
                                int stop,
                                BitSet types)
```
    Given a start and stop index, return a List of all tokens in the token type BitSet. Return null if no tokens were found. This method looks at both on and off channel tokens.
  - getTokens
```
public java.util.List getTokens(int start,
                                int stop,
                                java.util.List types)
```
  - getTokens
```
public java.util.List getTokens(int start,
                                int stop,
                                int ttype)
```
  - getSourceName
```
public java.lang.String getSourceName()
```
    Description copied from interface: IntStream
    
    Where are you getting symbols from? Normally, implementations will pass the buck all the way to the lexer who can ask its input stream for the file name or whatever.
    
    Specified by:
    
    getSourceName in interface IntStream
  - toString
```
public java.lang.String toString()
```
    Grab *all* tokens from stream and return string
    
    Overrides:
    
    toString in class java.lang.Object
  - toString
```
public java.lang.String toString(int start,
                                 int stop)
```
    Description copied from interface: TokenStream
    
    Return the text of all tokens from start to stop, inclusive. If the stream does not buffer all the tokens then it can just return "" or null; Users should not access $ruleLabel.text in an action of course in that case.
    
    Specified by:
    
    toString in interface TokenStream
  - toString
```
public java.lang.String toString(Token start,
                                 Token stop)
```
    Description copied from interface: TokenStream
    
    Because the user is not required to use a token with an index stored in it, we must provide a means for two token objects themselves to indicate the start/end location. Most often this will just delegate to the other toString(int,int). This is also parallel with the TreeNodeStream.toString(Object,Object).
    
    Specified by:
    
    toString in interface TokenStream
  - fill
```
public void fill()
```
    Get all tokens from lexer until EOF

Class BufferedTokenStream

Field Summary

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

tokenSource

tokens

lastMarker

p

range

Constructor Detail

BufferedTokenStream

BufferedTokenStream

Method Detail

getTokenSource

index

range

mark

release

rewind

rewind

reset

seek

size

consume

sync

fetch

get

get

LA

LB

LT

setup

setTokenSource

getTokens

getTokens

getTokens

getTokens

getTokens

getSourceName

toString

toString

toString

fill